AXEON® Solo I Reverse Osmosis System utilizes advanced membrane technology and features an integrated four stage filtration process, consisting of a sediment filter, sintered carbon block, RO membrane and inline post carbon.
AXEON Solo I Reverse Osmosis System houses three of its four cartridges inside a single housing, making servicing fast and simple. The fourth stage can either consist of an inline post carbon for even better tasting water or an optional remineralization cartridge that will naturally balance your water’s pH level.
The system includes a 3.2 gallon pressurized white metal storage tank, long reach faucet, tubing, and all the necessary fittings and hardware for a quick and easy installation.
- STAGE 1: 5 Micron Sediment Filter
- STAGE 2: Sintered Carbon Block
- STAGE 3: 50 GPD Reverse Osmosis Membrane
- STAGE 4: Inline Post Carbon
FEATURES
- AXEON High Flow 50 gpd RO Membrane
- AXEON 2-in-1 Sintered Carbon Block with 5-Micron Sediment Filter
- AXEON Inline Post Carbon
- Designer Long-Reach Air-Gap Faucet
- 3.2 Gallon Metal Storage Tank
- John Guest® Quick Connect Fittings
- Leak Detector Included
- All Installation Components
- 1-Year Manufacturer’s Warranty
Purified water for the entire family that is great tasting and perfect
for beverages and cooking. Pure water on demand from the faucet or
refrigerator and ice maker.
Reverse Osmosis is an effective water purification technology for
reducing total dissolved solids and other contaminants.
AXEON Solo I Reverse Osmosis System saves time and
money on service calls and replacement cartridges. The system
incorporates a 3/8″ tubing for the faucet connection and ensures a
higher flow rate. It also includes a leak detector that is installed
inline to the system and will interrupt the feed water supply if any
leak is detected.
Benefits
- 30% Higher Flow to the Faucet
- 50% Less Water to the Drain
- 50% Smaller Footprint
- High Flow RO Membrane Fills the Tank Faster
- High-Quality Integrated Sediment/Carbon Filter
- Bottle Quality Water from the Faucet
- Quick and Easy Installation & Service
SPECIFICATIONS
| Feedwater Requirements | |
|---|---|
| Pressure (psi / bar) | 40-80 / 2.76-5.52 |
| Temperature (ºF/ ºC) | 40-max temp of 85 F(29 C) / 4-38 |
| TDS (ppm) | < 1,000 |
| Turbidity (ntu) | < 1 |
| SDI | < 1 |
| pH | 4-8 |
| Chlorine (ppm) | < 0.1 ppm |
|
Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. |
|
| Performance Specification | |
|---|---|
| Membrane Model | Solo–1812–50 |
| Production (gpd / lpd) | 50 / 189.3 |
| Product to Waste | 1:2 |
| Nominal TDS Reduction % | 96 |
|
Tested with 550 ppm, filtered tap water, 77°F/25°C, 7.5-8 pH, 15% recovery at 60 psi (4 bar). Nominal flow rate +/-20%. |
|
| REPLACEMENT CARTRIDGES | |||
|---|---|---|---|
| Part Number | Stage | Description | Replacement Interval |
| 211477 | 1 & 2 | 2 Stage Filter P.P. Pre-Filter / Sintered Carbon | 6-12 Months |
| 211479 | 3 | 50 GPD Reverse Osmosis Membrane | 12 Months |
| 200654 | 4 | Inline Post Carbon (Prior to Faucet) | 6-12 Months |
| 211643 | 4 | Optional: Inline Remineralization Cartridge | 6-12 Months |
| Part Number | System Model | System Capacity (gpd / lpd) | Recovery % | Nominal TDS Reduction % | Dimensions L x W x H (in / mm) | Shipping Weight (lbs / kg) |
|---|---|---|---|---|---|---|
| 211470 | Solo I 50 GPD RO System | 50 / 189 | 33 | 96 | 16.5 x 11.0 x 15.0 / 419 x 280 x 381 | 15/7 |
THE RIGHT SOLUTION FOR YOU
Contact us today for more information about our products and services.
CONTACT US