L1 – Series Reverse Osmosis Systems

AXEON L1 – Series Reverse Osmosis Systems are a cost–effective solution for light commercial reverse osmosis applications such as coffee, tea, food preparation, misting, hydroponics, detailing and more.

AXEON L1 – Series Reverse Osmosis Systems feature a compact wall mount space saving design and comes pre–assembled and ready for immediate service with simple utility connections. These systems are available in capacities of 200 and 300 gallons per day and feature a single pump design for reliable performance. Each model is engineered with quality AXEON components including fiberglass (FRP) membrane housings, extra low energy membranes, pressure gauges, filters and housings.

Contact us today for availability or a quote
  • AXEON HF4 – Series Extra Low Energy Membrane Elements
  • AXEON FRP – Series 300E Fiberglass Membrane Housing
  • AXEON 5 – Micron Sediment Pre–Filter
  • AXEON 10 – Micron Carbon Block Pre–Filter and Post–Filter
  • AXEON by Pentek® 10” Slim Line Cartridge Housings
  • AXEON 0 – 300 psi Glycerin–Filled Pump Pressure Gauge
  • AXEON 0 – 100 psi Glycerin–Filled Pre–Filter Pressure Gauge
  • AXEON 0 – 100 psi Glycerin–Filled Permeate Pressure Gauge
  • Aquatec Tank High Pressure Switch
  • Composite Feed Solenoid Valve
  • Aquatec Auto Flush Timer Valve
  • Aquatec High Flow Booster Pump
  • John Guest® Push/Pull Fittings with Locking Safety Clips
  • 10” and 20“ Floor Stands
  • AXEON HF5 – Series Ultra Low Energy Membrane Elements
  • AXEON SS – Series Membrane Housing
  • TDS Dual Monitor
  • Configuration

    Single Pass
  • Feedwater Source†

    TDS <1000
  • Standard Recovery Rate

    40%
  • Nominal Salt Rejection %

    98.5
  • Permeate Flow (gpm / lpm)

    0.14 / 0.53
  • Minimum Concentrate Flow (gpm / lpm)

    0.21 / 0.79
  • Feed FNPT (in)

    3/8 QC
  • Permeate FNPT (in)

    3/8 QC
  • Concentrate FNPT (in)

    1/4 QC
  • Membrane(s) Per Vessel

    1
  • Membrane Quantity

    1
  • Membrane Size

    2514
  • Vessel Array

    1
  • Vessel Quantity

    1
  • Pump Type

    Aquatec 8800
  • Standard Voltage + Amp Draw

    110V, 60Hz, 1PH, 4.0A
  • High Voltage Service + Amp Draw

    220V, 50Hz, 1PH, 2A
  • Approximate Dimensions* L x W x H (in / cm)

    9 x 18 x 19 / 22.9 x 45.7 x 48.3
  • Approximate Weight (lbs / kg)

    42 / 19.1
  • Configuration

    Single Pass
  • Feedwater Source†

    TDS <1000
  • Standard Recovery Rate

    50%
  • Nominal Salt Rejection %

    98.5
  • Permeate Flow (gpm / lpm)

    0.21 / 0.79
  • Minimum Concentrate Flow (gpm / lpm)

    0.21 / 0.79
  • Feed FNPT (in)

    3/8 QC
  • Permeate FNPT (in)

    3/8 QC
  • Concentrate FNPT (in)

    1/4 QC
  • Membrane(s) Per Vessel

    1
  • Membrane Quantity

    1
  • Membrane Size

    2521
  • Vessel Array

    1
  • Vessel Quantity

    1
  • Pump Type

    Aquatec 5800
  • Standard Voltage + Amp Draw

    110V, 60Hz, 1PH, 4.0A
  • High Voltage Service + Amp Draw

    220V, 50Hz, 1PH, 2A
  • Approximate Dimensions* L x W x H (in / cm)

    9 x 27 x 19 / 22.9 x 68.6 x 48.3
  • Approximate Weight (lbs / kg)

    50 / 22.7
  • Design Temperature (°F / °C)

    77 / 25

    Maximum Turbidity (NTU)

    1
  • Maximum Feed Temperature (°F / °C)

    85 / 29

    Maximum Free Chlorine (ppm)

    0
  • Minimum Feed Temperature (°F / °C)

    40 / 4

    Maximum TDS (ppm)

    1,000
  • Maximum Ambient Temperature (°F / °C)

    120 / 49

    Maximum Hardness (gpg)

    1
  • Minimum Ambient Temperature (°F / °C)

    40 / 4

    Maximum pH (Continuous)

    11
  • Maximum Feed Pressure (psi / bar)

    85 / 6

    Minimum pH (Continuous)

    2
  • Minimum Feed Pressure (psi / bar)

    45 / 3

    Maximum pH (Cleaning 30 Minutes)

    13
  • Maximum Operating Pressure (psi / bar)

    110 / 7.5

    Minimum pH (Cleaning 30 Minutes)

    1
  • Maximum Feed Silt Density Index (SDI)

    <3

Test Parameters: 550 TDS Filtered (5 – Micron), Dechlorinated, Municipal Feedwater, 65 psi / 4.50 bar Feed Pressure, 100 psi / 6.9 bar Operating Pressure, 77ªF / 25ªC, Recovery as stated, 7.0 pH. Data taken after 60 minutes of operation.

† Low temperatures and feedwater quality, such as high TDS levels will significantly affect the systems production capabilities and performance. Computer projections must be run for individual applications which do not meet or exceed minimum and maximum operating limits for such conditions.

†† System pressure is variable due to water conditions. Permeate flow will increase at a higher temperature and will decrease at a lower temperature.

††† Product flow and maximum recovery rates are based on feedwater conditions as stated above. Do not exceed recommended permeate flow.