M – 100 Membrane Preservative

AXEON M – 100 Membrane Preservative safely controls microbiological growth within membrane elements and membrane systems during long and short term storage. It replaces the use of formaldehyde, sodium metabisulfite and other chemicals that are typically used. While formaldehyde or sodium metabisulfite are either hazardous or unstable, AXEON M– 100 is an effective long term solution and does not create environment or health risks. AXEON M – 100 is compatible with all membrane types and rinses easily from membranes. AXEON M – 100 Membrane Preservative is packaged as a dry, stable, nonreactive powder for ease of transportation.

Contact us today for availability or a quote
CONTACT US
PART NUMBER PACKAGING AMOUNT (GAL) pH APPEARANCE
206722 4 5.5 – 6.0 White Powder
206723 25 5.5 – 6.0 White Powder
206724 45 5.5 – 6.0 White Powder
Powder*
Appearance: White Powder
pH: 5.5 – 6
Packaging
Powder: 4 Pounds, 25 Pounds, 45 Pounds

Mix one pound of AXEON M – 100 Membrane Preservative to six gallons of good quality water such as a reverse osmosis permeate or better. Recirculate solution for at least 15 minutes. A pressure of less than 60 psi is recommended. After recirculation, shut down the system. Do not allow the AXEON M – 100 Membrane Preservative solution to drain from the membranes. The membranes may then be stored in the system vessels or they may be removed and stored in separate containers.
To prevent any form of freezing, make sure to add 20% by weight Glycol at the end of the mixing process.